ALDON Company, Inc.

Railroad Safety Products Since 1904
847.623.8800

It's the Law: Signs for Day. Lights for Night.

Aldon Makes osha Blue Flag Compliance Easy with
sign plates, sign holder and lights

flashing sign holdermagnetic sign holder

1910.261(c) "...the Blue Flag Policy shall be used to mark stationary cars day and night. This policy shall include marking the track in advance of the spotted cars (sign for daytime, light for darkness)."


SIGN PLATES
12"x15" .080 aluminum with Scotchlite lettering. Available in red or blue
$26.00 each

Choose wording and color

indicate qty:
 


SIGN HOLDERS

Every sign plate needs a holder. Here are our four most popular models, three for exposed rail and one for exposed or flush rail. Visit Aldonco.com for our complete line of railroad signs and holders.

Click to see the MouseTrap Sign Holder in action...



 

MouseTrap hinged base

The MouseTrap
Foot-operated hinged sign holder. The ultimate in worker convenience.

(sign plate sold separately .. see above)

#4015-95
$159.00

Weight: 12 lbs.



indicate qty:



Spur Track Guardian

spur track guardian

Day and Night, always on duty to protect your siding

Guardian package includes:

  • Hand-operated, hinged sign holder.

  • Sign plate, 12"x15" as shown (contact us if you need other wording).

  • Solar Light. 360° visible, six-LED brilliance, gravity switch turns light off when sign is lowered. Shatter-proof lens on light and battery.

#4015-93
$467.00 (holder, plate, light)

weight: 25 lbs.



indicate qty:



Clamp-On Sign Holder

Clamp-On sign holder

Steel holder clamps to rail head.

(Sign Plate sold separately)

#4015-01
$52.00

Weight 7 lbs.



indicate qty:

Magnetic Sign Holder

Magnetic Sign Holder

Magnet base aluminum holder. Rare earth magnets. Withstands 60 mph wind. For exposed or flush rail.

(Sign Plate sold separately)

#4015-54
$156.00

Weight 7 lbs.



indicate qty:




LIGHTS

bolt on barricade light




Safety Light

  • Uses two 6-volt batteries
    on-off switch
  • photo-electric cell
  • blue 7" diameter lexan lens
  • Battery case bolts to sign holder

 

#4115-01
$32.00

Weight:2 lbs.

indicate qty:

mini light

Mini-Light Magnet Base with mounting sleeve

  • Twist lens on and off.
  • Lithium coin cell battery gives 150 hours flashing.
  • Bracket fits 1" square sign holders.

 

#4015-32
$46.00


indicate qty:

 

Why Blue?

Blue is the traditional railroad color meaning "STOP". In 1970, when OSHA began issuing regulations for railroad safety on industrial sidings, they chose to adopt the color blue for signage to protect parked rail cars and crews working thosee cars...

Why then do we offer red signs as well as blue?

Some state or local railroad regulations require red signs on industrial sidings. Red is equally acceptable as blue to comply with OSHA regulations.

Where do you install the signs?

Signs should be at least 50 feet in front of the parked rail cars or building entrance to be protected

When do you install and remove the blue sign?

As soon as rail cars are delivered to your loading track the blue sign should be installed in front of the lead car and remain in place until the car has been cleared for removal by the railroad.

Blue Lights

At night, in order to draw greater attention to the blue sign, a flashing blue light should in place..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 


-- CLOSE --

-- CLOSE --